|
[Sponsors] |
June 8, 2006, 11:16 |
Gridgen: mesh quality
|
#1 |
Guest
Posts: n/a
|
Hi there,
is there a way to ensure that a mesh in Gridgen has a given quality? Perhaps a function to color all cells that have angles below a minimal angle? Thanks for responses! |
|
June 8, 2006, 14:38 |
Re: Gridgen: mesh quality
|
#2 |
Guest
Posts: n/a
|
Follow these steps
1) Domain 2) Examine 3) Choose the domains you want to examine 4) Function (here you are able to choose between several functions as area or angle) 5) Done With Gridgen 15.01 |
|
June 9, 2006, 05:04 |
Re: Gridgen: mesh quality
|
#3 |
Guest
Posts: n/a
|
Thanks for your response. You helped me a lot!
|
|
June 10, 2006, 18:19 |
Re: Gridgen: mesh quality
|
#4 |
Guest
Posts: n/a
|
If you really just want to see cells that are below or above a certain threshold, use the Display menu in Examine and do two things: 1) Set the min and max values to your thresholds. 2) Use the "Show" buttons to tell it to only display cells that are above or below range, depending on what you want to see. Also note that you get a tally of cells in the blackboard.
|
|
June 16, 2006, 09:00 |
Re: Gridgen: mesh quality
|
#5 |
Guest
Posts: n/a
|
Thanks for your response!
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 04:19 |
[ICEM] Negative volume error in hybrid mesh | siw | ANSYS Meshing & Geometry | 4 | September 3, 2014 06:25 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 07:20 |
Ansys 12.1 - Quality mesh - | bob12 | ANSYS Meshing & Geometry | 5 | December 11, 2010 14:04 |
Gridgen Mesh Pole Geometry | joecoppin | Pointwise & Gridgen | 0 | November 30, 2009 11:17 |