Creating a cylindrical block

Naruto · April 30, 2013, 13:07

Dear pointwise users,
I am currently trying to mesh a 3-D cylindrical computational domain which comprises of 3 blades. I think I am on the last phase of the meshing as I have already created surface mesh of the blades and boundary layer. I have also constructed mesh on the surface of the cylindrical computational domain. Now I need a block of cylindrical computational domain. I am planning to use create-assemble special-block as I have seen in the tutorials and webinars. After that I am required to create an external face. But I could not perform that. The 'save face' option remains inactive. Could any one help me on this matter?

SeanQuallen · April 30, 2013, 17:21

I'm not the expert here, but I'd suggest posting pictures so we can see what you have so far. Do your dimensions of the outer to inner domains match? Are you using unstructured or structured?

Naruto · May 1, 2013, 01:00

Capture.jpg

The picture is shown above. I want to create a block of the cylinder. But it is not working. I could not select all the surfaces to create one face which is required to create a block of the cylinder.

jchawner · May 17, 2013, 09:39

Naruto:

The unstructured block you've illustrated consists of 4 faces. The first must be the outer cylinder. Then you add, one by one, each of the green cylinders.

April 30, 2013, 13:07	Creating a cylindrical block	#1
Naruto Member Join Date: Nov 2012 Posts: 62 Rep Power: 13	Dear pointwise users, I am currently trying to mesh a 3-D cylindrical computational domain which comprises of 3 blades. I think I am on the last phase of the meshing as I have already created surface mesh of the blades and boundary layer. I have also constructed mesh on the surface of the cylindrical computational domain. Now I need a block of cylindrical computational domain. I am planning to use create-assemble special-block as I have seen in the tutorials and webinars. After that I am required to create an external face. But I could not perform that. The 'save face' option remains inactive. Could any one help me on this matter?

May 17, 2013, 09:39		#4
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 18	Naruto: The unstructured block you've illustrated consists of 4 faces. The first must be the outer cylinder. Then you add, one by one, each of the green cylinders. __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] FOAM FATAL ERROR: Inconsistent number of faces blockMesh::createMergeList() line 193	Hengel	OpenFOAM Meshing & Mesh Conversion	0	September 15, 2010 08:34
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
[Commercial meshers] Icem Mesh to Foam	jphandrigan	OpenFOAM Meshing & Mesh Conversion	4	March 9, 2010 02:58
blockMesh: block with 6 vertexes	dani	OpenFOAM	3	June 25, 2009 13:13
Bug in blockMesh	feymark	OpenFOAM Bugs	8	March 24, 2009 22:11

April 30, 2013, 17:21		#2
SeanQuallen New Member Sean Quallen Join Date: Dec 2011 Posts: 9 Rep Power: 14	I'm not the expert here, but I'd suggest posting pictures so we can see what you have so far. Do your dimensions of the outer to inner domains match? Are you using unstructured or structured?

May 1, 2013, 01:00		#3
Naruto Member Join Date: Nov 2012 Posts: 62 Rep Power: 13	Capture.jpg The picture is shown above. I want to create a block of the cylinder. But it is not working. I could not select all the surfaces to create one face which is required to create a block of the cylinder.