CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > Pointwise & Gridgen

Small problem in Gridgen - Database display

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 20, 2007, 06:52
Default Small problem in Gridgen - Database display
  #1
Nico
Guest
 
Posts: n/a
Hello,

In Display->Edit Display->DB: Intrvls can be used as render mode. On a line this puts points at the end. My problem is that i have not found a way to switch back to the default display (=no points on DB). And i have tried a few things.

Thanks,

Nico
  Reply With Quote

Old   April 21, 2007, 15:08
Default Re: Small problem in Gridgen - Database display
  #2
John Chawner
Guest
 
Posts: n/a
Nico,

Change the line's Render Mode to Isolines.

Intervals draws the curve or surface by the intervals in its parametrization. Also, every interval boundary is a pickable point. A surface in Interval mode is drawn as a MxN wireframe of quads. The intersection of the render lines is a pickable point. For a curve, there's only one line so to make the interval boundaries visible (so you can pick them) they're drawn as small filled squares.

Isolines draws the entity by iso-parametric lines; lines of constant U and V parameter values. Drawing a surface with 2x2 isolines draws it by its perimeter: the Umin, Umax, Vmin, and Vmax parameter lines. Drawing a curve with isolines gives you just a line.

The differences are subtle. Hope it makes more sense now.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] Paraview display problem jiejie ParaView 4 October 13, 2013 22:29
ParaView display problem holzmichel OpenFOAM Bugs 7 April 27, 2009 19:42
Gridgen export problem with memory allocation? july Pointwise & Gridgen 5 July 21, 2008 21:29
Problem with Gridgen chris Pointwise & Gridgen 5 July 7, 2006 08:00
extremely simple problem... can you solve it properly? Mikhail Main CFD Forum 40 September 9, 1999 10:11


All times are GMT -4. The time now is 09:17.