CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > Pointwise & Gridgen

Dynamic Mesh for OpenFOAM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 5, 2019, 17:40
Default Dynamic Mesh for OpenFOAM
  #1
New Member
 
MO
Join Date: Jun 2019
Posts: 5
Rep Power: 2
czb58 is on a distinguished road
Hi,

I am new for the dynamic mesh generation. Can anyone tell me how to setup in pointwise if I want to generate two separate volumes for the OpenFOAM case?


I have done the following command. However, it seems like it doesn't work in OpenFOAM.
CAE->Set volume conditions -> "volumeToCell"


The following figure shows the computational domain. I just want to separate it into two sub-domains.

Thanks,
Chao

Untitled Diagram.jpg
czb58 is offline   Reply With Quote

Old   July 8, 2019, 13:21
Default
  #2
Senior Member
 
David Garlisch
Join Date: Jan 2013
Location: Pointwise HQ
Posts: 238
Rep Power: 9
dgarlisch is on a distinguished road
The details here are a little sparse. Can you please provide more information on what you are trying to accomplish?

Also, please ZIP and attach the PW file if you can.

If you are using "sliding interfaces", you can:
  • Export each block separately.
  • Use the VolumeToCell VCs to create cell sets.
  • Use the faceSet BCs to create face sets for the sliding interfaces.
    • These sets can be used by OpenFOAM tools to isolate cell/faces.
    • People who know more about OF would need to provide details about these tools.
dgarlisch is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sliding / Dynamic Mesh in heat transfer problem platzhalter FLUENT 0 May 7, 2018 05:25
[ICEM] Dynamic mesh setup with ICEM David121284 ANSYS Meshing & Geometry 0 April 11, 2014 04:19
Dynamic Mesh "Shadow Wall" thezack FLUENT 0 June 4, 2013 22:09
dynamic mesh for drop interface IndrajitW FLUENT 0 March 30, 2013 08:03
Dynamic Mesh on Pintle type injector. herntan FLUENT 15 January 4, 2012 03:31


All times are GMT -4. The time now is 20:30.