|
[Sponsors] |
April 15, 2020, 19:23 |
Higher order Mesh cgns error
|
#1 |
New Member
Mons
Join Date: May 2019
Posts: 21
Rep Power: 6 |
Hi Guys,
I am having trouble in making this high order mesh of Polynomial2 or 3 . it keep giving me this error of non planar constraint,. Any advice or suggestion to fix it? Attached image for reference |
|
April 19, 2020, 15:08 |
|
#2 |
Senior Member
David Garlisch
Join Date: Jan 2013
Location: Fidelity Pointwise, Cadence Design Systems (Fort Worth, Texas Office)
Posts: 307
Rep Power: 14 |
The error messages tell you that the export is failing because:
When curving a mesh, all non-planar domains must be associated to a database surface. The curving process need this so it can project inserted HO points to their proper surface locations. Select dom-105 an then use menu Examine, Database Associativity to see which domain interior points are not constrained. Use menu Edit, Project... to associate the domain interior points to their appropriate database entity. Same goes for dom-100. However, if dom-100 is "visually" planar, it probably means some of its points very slightly out of plane. This can happen when grid entities are created via extrusions and/or rotations. To fix, you will need to create an appropriate plane database entity and project dom-100 to it. You are not running the latest Pointwise. If you can, upgrade to Pointwise V18.3 Release 2 Candidate 4 or newer. This version relaxed some of the HO error checking and may allow you to export your grid without making any changes. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
error compiling modified applications | yvyan | OpenFOAM Programming & Development | 21 | March 1, 2016 05:53 |
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 19:00 |
OpenFOAM without MPI | kokizzu | OpenFOAM Installation | 4 | May 26, 2014 10:17 |
ParaView for OF-1.6-ext | Chrisi1984 | OpenFOAM Installation | 0 | December 31, 2010 07:42 |
user subroutine error | CFDUSER | CFX | 2 | December 9, 2006 07:31 |