CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (https://www.cfd-online.com/Forums/pointwise/)
-   -   Generating image for publication (https://www.cfd-online.com/Forums/pointwise/226945-generating-image-publication.html)

donatello May 12, 2020 16:25

Generating image for publication
 
I am trying to generate an image of my Pointwise grid. However, the grid is too refined to show any detail at all - the whole thing appears as a solid block. I have seen images of grids in publication where every 10th, or 100th, say, grid line is shown and the rest are hidden, to give a sense of where the grid is fine without exactly representing the mesh.


Is it possible to do this in Pointwise?


Thanks a lot

donatello May 14, 2020 12:58

For the edification of those that follow: View -> Attributes -> Advanced lets you specify the number of isolines, which accomplishes the stated goals.


All times are GMT -4. The time now is 10:20.