CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > Pointwise & Gridgen

Trouble with Generating a Structured Block for a Circular Nozzle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 18, 2020, 09:33
Default Trouble with Generating a Structured Block for a Circular Nozzle
  #1
New Member
 
Join Date: May 2020
Posts: 1
Rep Power: 0
Madhav_Ganapathy is on a distinguished road
Hi

I want to create a structured block for my circular nozzle as a part of the free jet analysis I wish to perform in Ansys CFX. I created the domain in the circular surfaces in 2 ways. The first time I used a Pole to create a circular mesh and in the second time I tried using the butterfly topology as mentioned in Pointwise Tutorials. The mesh gets created and desired skewness is maintained.

I am unable to convert the domains into a block. Documentation says I need 6 faces to created a structured block. So I split the circular faces into 2 parts to get 6 faces, but it does not let me choose the 6th face. I receive the error "Cannot create block with chosen surfaces" I have attached a pic of the same. Please do help me out.
Attached Images
File Type: jpg Screenshot (81).jpg (136.5 KB, 5 views)
Madhav_Ganapathy is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Trouble with meshing Chevron Nozzle piyushvjn ANSYS Meshing & Geometry 0 May 26, 2014 15:14
Trouble with Nozzle boundary condition lehoanganh07 OpenFOAM Running, Solving & CFD 0 October 26, 2013 07:24
foamLog not solving for Ux, Uy, Uz aerospain OpenFOAM Post-Processing 5 April 18, 2012 10:01
Doxygen documentation Tanay OpenFOAM Installation 9 September 23, 2011 11:40
compressible flow in a counterflow nozzle d.vamsidhar FLUENT 0 November 24, 2005 01:45


All times are GMT -4. The time now is 07:37.