CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > Pointwise & Gridgen

Quilt Mode | Irreconcilable Orientation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 6, 2021, 12:06
Default Quilt Mode | Irreconcilable Orientation
  #1
Senior Member
 
Pay D.
Join Date: Aug 2011
Posts: 158
Blog Entries: 1
Rep Power: 12
pdp.aero is on a distinguished road
Hi there,

I have a disk and inside the disk there is a propeller. I am using trex by putting front and back of disk as match boundary condition.

This warning appears when I initialize the process.

Warning: dom-17: Could not initialize in quilt mode. Irreconcilable orientation.
Warning: dom-16: Could not initialize in quilt mode. Irreconcilable orientation.

These two domains are front and back of the disk and generated using domain on database feature based on average ds and advancing front ortho on quilts.

I am wondering what this warning is trying to say. Any idea?

Thanks.
pdp.aero is offline   Reply With Quote

Old   June 11, 2021, 14:40
Default
  #2
Senior Member
 
Pay D.
Join Date: Aug 2011
Posts: 158
Blog Entries: 1
Rep Power: 12
pdp.aero is on a distinguished road
Quote:
Originally Posted by pdp.aero View Post
Hi there,

I have a disk and inside the disk there is a propeller. I am using trex by putting front and back of disk as match boundary condition.

This warning appears when I initialize the process.

Warning: dom-17: Could not initialize in quilt mode. Irreconcilable orientation.
Warning: dom-16: Could not initialize in quilt mode. Irreconcilable orientation.

These two domains are front and back of the disk and generated using domain on database feature based on average ds and advancing front ortho on quilts.

I am wondering what this warning is trying to say. Any idea?

Thanks.
Well, this issue was only because I had two parallel planes trimming a shaft along the x-axis and then creating surface mesh on their quilts and merging connectors at the intersection. Then at the intersection there were two quilts: shaft and the plane, which used to define the rotational zone, and at the intersection connectors were projected on the shaft's quilt and not on the plane's quilt, so there were Irreconcilable orientation of quilts.

I am not sure what exactly the quilt mode is here when unstructured solver process a block though.
pdp.aero is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops avinashjagdale OpenFOAM Meshing & Mesh Conversion 53 March 8, 2019 10:42
Not defined orientation change while running SU2_CFD mdawson25 SU2 4 May 11, 2017 10:52
[PyFoam] Problems with the new PyFoam release zfaraday OpenFOAM Community Contributions 13 December 9, 2014 19:58
[PyFoam] having problems with pyfoam Installation vitorspadetoventurin OpenFOAM Community Contributions 3 December 2, 2014 08:18
Multicomponent fluid Andrea CFX 2 October 11, 2004 06:12


All times are GMT -4. The time now is 03:16.