CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > Pointwise & Gridgen

Gridgen problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 10, 2005, 12:15
Default Gridgen problems
  #1
Vincent
Guest
 
Posts: n/a
I have the following problem in GridGen V15:

After creating domains I can not create a Block, since GridGen detects "free edges" in some connectors. How can I get rid of those edges? I do not know why these free edges exist, the connectors in which the problem is detected are all used in 2 domains, and therefore the domains seem to form a closed surface.
  Reply With Quote

Old   November 12, 2005, 18:20
Default Re: Gridgen problems
  #2
John Chawner
Guest
 
Posts: n/a
Hi Vincent,

Try the Merge command in the Connectors menu. It will display all connectors by how they're used in the mesh. If any red (i.e. free) edges show up in the middle of a block's face, those connectors will have to be merged using other commands in the Merge menu.

One reason this can happen is if the domains were created on database entities using the On DB Ents command and the grid inherited gaps from the database. The Merge command fixes this.

If the grid file is relatively small, feel free to email it to me at gridgen at pointwise dot com.

Hope this helps.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 6 December 1, 2020 12:12
How to import NACA 0012 Profile in Gridgen maplepink Main CFD Forum 17 May 7, 2013 14:01
[Commercial meshers] Several problems with the mesh conversion utility when converting the meshes from Gridgen su_junwei OpenFOAM Meshing & Mesh Conversion 2 July 27, 2008 00:58
gridgen to fluent problems Nico FLUENT 3 October 8, 2006 13:28
Gridgen question vishwas Pointwise & Gridgen 2 February 25, 2006 17:05


All times are GMT -4. The time now is 04:46.