|
[Sponsors] |
July 25, 2021, 16:48 |
Numeriacl Model
|
#1 |
New Member
Rouxiao Chen
Join Date: Jun 2021
Posts: 13
Rep Power: 4 |
Hi Team REEF3D,
The REEF3D: CFD use Level Set (LS) Method to capture interface, but the LS method has the difficulty with volume conservation after reinitialization. How this problem is addressed? Best Wishes, |
|
July 26, 2021, 03:17 |
|
#2 |
Senior Member
Arun Kamath
Join Date: Nov 2014
Location: Trondheim, Norway
Posts: 265
Rep Power: 13 |
Hi Freya,
As you can see from Bihs et al (2016) https://doi.org/10.1016/j.compfluid.2016.09.012, the level set method in REEF3D is implemented with high order discretisation schemes. Along with a sufficiently fine grid size, there are no problems with volume conservation. Hope that helps
__________________
Arun X years with REEF3D |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[IHFOAM] The IHFOAM Thread | Phicau | OpenFOAM Community Contributions | 392 | September 8, 2023 18:10 |
viewFactor radiation model stuck | shach934 | OpenFOAM | 1 | May 25, 2021 11:01 |
interFoam wave propagation and explosion of Courant number and residuals | ChiaraViola | OpenFOAM Running, Solving & CFD | 1 | June 26, 2019 05:36 |
manualInjection model in sprayFoam | Mentalo | OpenFOAM Running, Solving & CFD | 1 | April 2, 2014 09:29 |
Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 25, 2009 23:27 |