visualization of waves

ajayjatoliya · January 9, 2024, 03:55

Hello REEF3D Team,

I want to visualize the breaking waves as shown in the REEF3D manual tutorial 9.14 (Breaking Waves).
Fig. 1 I am getting
Fig. 2 I want to visualize

Felix_Sp · January 9, 2024, 15:08

Hey,

maybe this is an misunderstanding, but just use a clip-filter with phi=0 instead of a contour-filter on the REEF3D-CFD-000000.pvtu*.

Hope that helps.

ajayjatoliya · January 10, 2024, 01:13

Hey,

When i choosing clip filter, there is no option coming for phi=0

Felix_Sp · January 10, 2024, 03:33

Ar you sure you are using the REEF3D-CFD-00000*.pvtu and not REEF3D-CFD-FSF-00000*.pvtp?

ajayjatoliya · January 10, 2024, 06:58

Hey,

I have attached a figure. In this, you can see, on the left side, I have chosen the same .pvtu, but no option is coming for phi=0, as it comes when we chose contour

Thank you

Felix_Sp · January 10, 2024, 07:05

Change clip type from plane to scalar

valgrinda · January 10, 2024, 12:18

Yes, that is the way to do it.

ajayjatoliya · January 11, 2024, 01:10

Hey,

Thank you, It works

January 10, 2024, 12:18		#7
valgrinda Super Moderator Hans Bihs Join Date: Jun 2009 Location: Trondheim, Norway Posts: 377 Rep Power: 17	Yes, that is the way to do it. __________________ Hans Bihs Team REEF3D www.reef3d.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[waves2Foam] combined set of waves with waves2Foam	blaise	OpenFOAM Community Contributions	7	December 16, 2023 08:33
gravitational waves and capillary waves	astroam	COMSOL	0	August 15, 2015 16:49
gravitational waves and capillary waves	astroam	COMSOL	0	August 1, 2015 10:38
WAVES GENERATION IN A PORT OR BRAKE WAVES. important	tecnicaf1	STAR-CCM+	1	May 27, 2011 07:32
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 09:11

January 9, 2024, 15:08		#2
Felix_Sp Member Felix S. Join Date: Feb 2021 Location: Germany, Braunschweig Posts: 85 Rep Power: 6	Hey, maybe this is an misunderstanding, but just use a clip-filter with phi=0 instead of a contour-filter on the REEF3D-CFD-000000.pvtu*. Hope that helps.

January 10, 2024, 01:13		#3
ajayjatoliya Member Ajay Jatoliya Join Date: Nov 2022 Posts: 64 Rep Power: 3	Hey, When i choosing clip filter, there is no option coming for phi=0

January 10, 2024, 03:33		#4
Felix_Sp Member Felix S. Join Date: Feb 2021 Location: Germany, Braunschweig Posts: 85 Rep Power: 6	Ar you sure you are using the REEF3D-CFD-00000.pvtu and not REEF3D-CFD-FSF-00000.pvtp?

January 10, 2024, 07:05		#6
Felix_Sp Member Felix S. Join Date: Feb 2021 Location: Germany, Braunschweig Posts: 85 Rep Power: 6	Change clip type from plane to scalar

January 11, 2024, 01:10		#8
ajayjatoliya Member Ajay Jatoliya Join Date: Nov 2022 Posts: 64 Rep Power: 3	Hey, Thank you, It works