CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > REEF3D

grid settings

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 26, 2021, 02:16
Post grid settings
  #1
New Member
 
Wenyu Zhao
Join Date: Apr 2021
Posts: 17
Rep Power: 2
Andrea-wwwwwwww is on a distinguished road
Hello, in order to reduce the number of grids, I did not use the uniform grid when setting the grid, but set it to three areas, and only encrypt in the middle area. The setting command is as follows
B 101 8
B 121 210 21 600 51 30
B 101 8
B 121 0 0 1 0.05 0
B 103 8
B 123 23 2.3 60 5.3 17
However, the following error 'segmentation fault' will always appear when running '/ divemesh'. What should I do?
Andrea-wwwwwwww is offline   Reply With Quote

Old   September 27, 2021, 17:54
Default
  #2
Senior Member
 
Hans Bihs
Join Date: Jun 2009
Location: Trondheim, Norway
Posts: 145
Rep Power: 14
valgrinda is on a distinguished road
Hi Wenyu Zhao,

could you upload the complete control.txt file? Then I can have a look.
__________________
Hans Bihs
Team REEF3D
www.reef3d.com
valgrinda is online now   Reply With Quote

Old   September 27, 2021, 22:04
Default
  #3
New Member
 
Wenyu Zhao
Join Date: Apr 2021
Posts: 17
Rep Power: 2
Andrea-wwwwwwww is on a distinguished road
Quote:
Originally Posted by valgrinda View Post
Hi Wenyu Zhao,

could you upload the complete control.txt file? Then I can have a look.
Thank you for your reply! The following is the content of my 'control.txt' file

C 11 6
C 12 21
C 13 21
C 14 8
C 15 21
C 16 3


B 10 0.0 54.0 0.0 0.05 0.0 7.0

B 101 8
B 121 210 21 600 51 30
B 102 8
B 122 0 0 1 0.05 0
B 103 8
B 123 23 2.3 60 5.3 17

S 1 1
S 6 1
S 7 0 -2 0

M 20 2

M 10 12
Andrea-wwwwwwww is offline   Reply With Quote

Old   September 28, 2021, 03:35
Default
  #4
Member
 
Arun Kamath
Join Date: Nov 2014
Location: Trondheim, Norway
Posts: 99
Rep Power: 10
kamath is on a distinguished road
You seem to be missing B 2
This defines the total number of cells in each direction when you use the grid stretching approach.
__________________
Arun
Team REEF3D
www.reef3d.com
kamath is offline   Reply With Quote

Old   September 28, 2021, 03:42
Post
  #5
New Member
 
Wenyu Zhao
Join Date: Apr 2021
Posts: 17
Rep Power: 2
Andrea-wwwwwwww is on a distinguished road
Quote:
Originally Posted by kamath View Post
You seem to be missing B 2
This defines the total number of cells in each direction when you use the grid stretching approach.
OK, thank you very much for your reply!
Andrea-wwwwwwww is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
IBM grid recognition in foam-extend 4.1 Guanzhu OpenFOAM 0 January 25, 2021 22:23
having problems with performing grid convergence study in SWFS drdet FloEFD, FloWorks & FloTHERM 12 January 22, 2015 05:44
MapFields to New Grid For Extreme Grid Deformations due to Body Motion albcem OpenFOAM 0 May 5, 2009 15:17
Grid Adaptation Suresh FLUENT 0 October 15, 2003 14:18
GRID TO GRID INTERPOLATION in FLUENT calogero FLUENT 3 June 4, 2003 09:32


All times are GMT -4. The time now is 09:51.