CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

STAR-CCM Coupled explicit problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   May 18, 2012, 08:40
Unhappy STAR-CCM Coupled explicit problem
New Member
Andrew Niven
Join Date: May 2012
Posts: 1
Rep Power: 0
AndyNiven is on a distinguished road
I cannot seem to select a turbulence model when I have chosen a coupled, explicit unsteady problem; the choice is only inviscid or laminar. When I choose a turbulence model I can only run the problem implicit unsteady. I do not understand why this is the case. Any help would be greatly appreciated.

I've sorted this now, but can't seem to delete the post!!

Last edited by AndyNiven; May 22, 2012 at 12:53. Reason: Problem Solved.
AndyNiven is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 05:04
Restart Star CCM server? Apocolapse STAR-CCM+ 1 January 10, 2012 04:56
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
error in star ccm maurizio Siemens 3 October 16, 2007 06:17
problem on DPM coupled with CFD harry Main CFD Forum 0 June 2, 2005 07:12

All times are GMT -4. The time now is 04:56.