simple spray problem
Hello,
I am struggling with simple spray problem. If anybody aware of this please help me out. in star.info file I am getting like this. Time step = 2; Elapsed time = 2.000000E-05 s; Period = 1 ================================================== =============== *** Injection Subroutine: Status on Entry *** Total Droplets : 0 Active Droplets : 0 Parent Droplets : 0 Stuck Droplets : 0 Deleted Droplets : 0 Total Liquid Mass : 0.0000 FUEL INJECTION AND NOZZLE MODELING ================================== INJECTOR MASS INJECTED EFF. INJ. VEL. SPRAY ANGLE 1 0.0000 0.0000 0.0000 *** Injection Subroutine: Status on Exit *** Total Droplets : 0 Active Droplets : 0 Parent Droplets : 0 Stuck Droplets : 0 Deleted Droplets : 0 Total Liquid Mass : 0.0000 I have defined a droplet and starting and stopping time massflow rate everything. but I can not able to see in sumulation. Can you pleas ehelp me out. Thanks in advance. Krishna |
Is your spray start time > 2E-5 sec?
|
I have given
starting time 0 stopping time 0.0015 time step 0.00001 Thanks for ur responce. I got the mistake what i did. I have given the parcel count very less. i e 200. we need to give for each time step minimum one parcel is required. now i have given 3 laks/sec. so almost 3 drops per time step. Thanks Pauli.. bye |
All times are GMT -4. The time now is 16:14. |