CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

'Exhaust Type' Volume Mesh Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 23, 2014, 05:37
Default 'Exhaust Type' Volume Mesh Problem
  #1
New Member
 
Paul Weller
Join Date: Feb 2014
Posts: 5
Rep Power: 12
PWeller is on a distinguished road
To anyone that can help,

I am trying to volume mesh a gas flow through an exhaust type system with one inlet and several outlets, into atmospheric conditions. The aim is to use streamlines to find the resulting effects.

Before I get bombarded with questions here is what I have already tried;

1 region for all the parts, which includes a velocity inlet into the system and a pressure outlet at the end of the system within a confined area. Surface Mesh has already been generated, along with a leak detection test. Surface Mesh has already been enhanced to get required accuracy on specific surfaces. The surface mesh only consists of the surface wrapper. To generate the volume mesh the Surface Wrapper, Surface Remesher, Polyhedral Mesher, Prism Layer Mesher model are selected.

2 regions; 1 for the enclosed pipe flow and one for the atmospheric conditions which is separated by creating an interface between the regions at the pressure outlets. Separate meshes have been generated for each region as seen above.

Overset Mesh overlapping two regions. The overset mesh incorporates the parts as one region overlapping atmospheric conditions in the second region. same process has been used as above.

Every time I come to generate a volume mesh it gives me an error message;

'region not manifold'
'surface not closed'
'baffle not closed'

Any suggestions or techniques that other have used for similar problems would be greatly appreciated.

PWeller
PWeller is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM.org] compile error in dynamicMesh and thermophysicalModels libraries NickG OpenFOAM Installation 3 December 30, 2019 01:21
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) Aadhavan OpenFOAM Meshing & Mesh Conversion 2 March 8, 2018 02:47
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Error during initialization of "rhoSimpleFoam" kornickel OpenFOAM Running, Solving & CFD 8 September 17, 2013 06:37
T Junction Stability ignacio OpenFOAM Running, Solving & CFD 5 May 2, 2013 11:44


All times are GMT -4. The time now is 07:27.