 |
 |
 |
|
|
|
[Sponsors] | ||||
Problem in giving condition for Coefficient of Lift/Drag for a airfoil. |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 18, 2017, 13:48
|
Problem in giving condition for Coefficient of Lift/Drag for a airfoil.
|
#1 |
|
New Member
Maharshi
Join Date: Mar 2017
Posts: 6
Rep Power: 9  |
Dear all,
I am facing issues while simulating a airfoil for angle of attack of 10 degrees. To achieve that i have made the airfoil geometry horizontal and am giving different component values (x,y,z) for velocity to achieve the desired angle of attack. Now in Star CCM reports for the direction of Coefficient of Lift/Drag should i gave the Sin/Cos of the angle or just simply 1. I have tried both but i am not getting acceptable results. Please guide me through the situation. Thanks in advance |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ffd_control_point_2d | feiyi | SU2 | 4 | September 30, 2019 12:42 |
| Problem with boundary condition in airfoil case | Jefferson_dhv | OpenFOAM Pre-Processing | 1 | August 25, 2014 15:13 |
| Problem with "symmetryPlanne" boundary condition | fcuevas | OpenFOAM Running, Solving & CFD | 1 | March 14, 2012 05:07 |
| Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 05:59 |
| problem with boundary condition??? | smn | CFX | 5 | November 24, 2009 06:37 |
Linear Mode
