CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Lagrangian-VOF Evaporation in Star CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 27, 2018, 10:10
Default Lagrangian-VOF Evaporation in Star CCM+
  #1
New Member
 
A K Chetty
Join Date: Apr 2017
Location: West Lafayette
Posts: 6
Rep Power: 4
akchetty is on a distinguished road
Hi, i am trying to simulate volatile liquid pentane droplet evaporation when it comes in contact with hot water. It is like spray of pentane droplets into hot water bath.

For this case, I have been trying to set up the case in star ccm+ v13 , where i define the droplets as lagrangian phase and water as eulerian phase. I also define the pentane vapor as eulerian phase. Now how should i define the three phases as ? Multicomponent liquids and multicomponent gas ? Also, i could choose quasi steady evaporation model after defining pentane liquid droplets as multi-component liquid but i could not assign the vapor components inside the evaporation model. When i click on the dropdown button to chose vapor components, it just says/shows none and the pentane vapor component does not show up at all. Is there any step i am missing ? Or can you guide me through the process of setting up this case ? Looking forward to you reply. Thank you
akchetty is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
evaporation using VOF in STAR CCM+ aaron_lan STAR-CCM+ 2 July 27, 2018 10:26
problem when imported geometry from 3D CAD to star ccm, TAREK GANAT STAR-CCM+ 1 May 21, 2013 22:15
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 04:04
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 04:38
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15


All times are GMT -4. The time now is 12:40.