CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

FGM table in STAR CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 30, 2019, 06:57
Default FGM table in STAR CCM+
  #1
dsj
New Member
 
David
Join Date: Aug 2019
Posts: 1
Rep Power: 0
dsj is on a distinguished road
The starccm+ manual states that when using the FGM model, a single point is recommended for the progress variable variance, i.e. an assumed delta function PDF for the progress variable. Can someone explain why? Does this refer to both 0D and 1D reactor types, or just to the 0D case?
dsj is offline   Reply With Quote

Reply

Tags
fgm, reacting flow, starccm+

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem when imported geometry from 3D CAD to star ccm, TAREK GANAT STAR-CCM+ 1 May 21, 2013 22:15
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 04:04
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 04:38
error in star ccm maurizio Siemens 3 October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15


All times are GMT -4. The time now is 10:44.