CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Visualisation of baffles!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 15, 2000, 03:00
Default Visualisation of baffles!
Anders Jönson
Posts: n/a
Hi everyone,

I have a question regarding baffles, i.e. surfaces with fluid on both sides. In my thermal radiation simulations I have baffles with different propertys on the different side. I would like to plot the temperature distribution on one side. How is that done in Prostar? Anyone with some hints or ideas?

  Reply With Quote

Old   August 9, 2000, 01:31
Default Re: Visualisation of baffles!
Posts: n/a
HI Jonson,

This type of prob. can be solved by defining the diff. properties for both sides i.e while difining the boundaries u will find the Q for Side 1 and side 2 where u can difine the with diff. properties of the baffles(conduction, flux flow,adiabatic and heat resistance).

Try to slove it in this manner. BNLOO
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Baffles in Flow-3D v 9.3 Julien FLOW-3D 2 December 15, 2014 00:10
Baffles Siddharth Siemens 2 June 28, 2006 12:52
BAFFLES PROBLEM subhash Siemens 0 November 29, 2005 06:16
adding baffles Jared Siemens 1 September 19, 2005 11:29
Permeable baffles m-hack Siemens 0 October 29, 2003 02:14

All times are GMT -4. The time now is 11:14.