CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Complex boundary conditions??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 21, 2000, 12:19
Default Complex boundary conditions??
  #1
Moussa Diarra
Guest
 
Posts: n/a
Hi Can anybody help me? i'am trying to simulate Air Flow between two independant rotating disks and i have a problem to define the boundary conditions (there is no inlet/outlet boundaries).The only condition i know is The static pressure (atmosphere 1.013e5 Pa) is present everywhere before the rotor disk starts. All ideas are welcome.

Regards
  Reply With Quote

Old   April 27, 2000, 09:55
Default Re: Complex boundary conditions??
  #2
tobbe
Guest
 
Posts: n/a
If the disks are perfectly circular and symmetric the easiest thing is to put a cylindrical coordinate system in the center of each disk and then use a moving wall boundary at each disk utilizing the coordinate systems just created. The walls will then be seen as rotating even if the actual mesh is fixed.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 15:48
Boundary conditions for turbulent boundary layer Thomas FLUENT 1 June 17, 2008 06:14
boundary conditions for boundary layer flow A. Al-zoubi CFX 0 November 3, 2007 08:11
Integral boundary conditions turbulent intensitylength boundary conditions olesen OpenFOAM Running, Solving & CFD 0 July 27, 2006 08:18
Complex boundary conditions?? Moussa Diarra Main CFD Forum 7 April 25, 2000 12:25


All times are GMT -4. The time now is 01:21.