CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Refine mesh in cylindrical coordinate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 11, 2000, 08:59
Default Refine mesh in cylindrical coordinate
  #1
Moussa Diarra
Guest
 
Posts: n/a
Hello,

i have a cylindrical sector and i would like to refine the inferior part of my cylinder only in r and z direction (the coordinates are r,angle,z). This is normally done by : CREF 2 1 2 CSET The command is done successfully except near the centre of my cylinder where prostar divide some cells in Theta direction. If you already encounter this problem can you help?

Star-CD version 3.10
  Reply With Quote

Old   May 12, 2000, 11:08
Default Re: Refine mesh in cylindrical coordinate
  #2
Rachid
Guest
 
Posts: n/a
hallo Moussa, if you like to refine cell in cylindrical sector. 1 choose the zylindrical coordinate 2 choose the plan x,y in prostar(view z) than in star guide/create and import grids/grid refinement/cell refinement/new/zone and make a polygone arond the figure and klick of done/than write (cref 2 2 1,cset,,,merge,couple,1) and the rest for the plan(view Y)

Rachid
  Reply With Quote

Old   May 12, 2000, 18:22
Default Re: Refine mesh in cylindrical coordinate
  #3
steve
Guest
 
Posts: n/a
If your model goes all the way to the centerline and you have prisms around the centerline then you cant do what you want. Check the help on CREFINE and you will find that for prisms, ndivi=ndivj = an even number.
  Reply With Quote

Old   May 16, 2000, 11:27
Default Re: Refine mesh in cylindrical coordinate
  #4
Moussa Diarra
Guest
 
Posts: n/a
Thank you!!
  Reply With Quote

Old   August 9, 2000, 01:46
Default Re: Refine mesh in cylindrical coordinate
  #5
B.N.LOO
Guest
 
Posts: n/a
Hi Moussa,

Plesae ref. the User's guide Chap. Other type meshing for this type problems, to refine the specific zones.

bnloo
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cylindrical coordinate vs cartesian coordinate Lam FLUENT 10 May 11, 2013 14:05
I need help for cylindrical coordinate in LES Agus Main CFD Forum 1 October 23, 2003 10:09
FDM in Cylindrical Coordinate Piakman Main CFD Forum 8 November 26, 2001 11:14
cylindrical coordinate anjan chakraborty Main CFD Forum 1 December 10, 2000 23:41
Star-cd:Refine mesh in cylindrical coordinate system Moussa Diarra Main CFD Forum 0 May 11, 2000 09:17


All times are GMT -4. The time now is 07:49.