CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

for O.Kaario

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 31, 2000, 06:00
Default for O.Kaario
Posts: n/a
Kaario, Are you still getting these increasing temperatures in the expansion stroke. In my case, I just got a smooth expansion stroke, every thing is going down.. the max. pressure and temp were O.K. after combustion. The only thing is I didn't apply yet the heat transfer across the cylinder wall. =Ahmed=
  Reply With Quote

Old   September 4, 2000, 04:22
Default Re: for Ahmed
Ossi Kaario
Posts: n/a

you checked the mass averaged mean gas temperature ? In your case, is it a decreasing value all the expansion stroke ? (in my case the cylinder is not adiabatic, however) BTW, what kind of an engine do you simulate ?


  Reply With Quote

Old   September 5, 2000, 04:08
Default Re: for Ahmed
Posts: n/a
Yes the temperature is decreasing all the way during expansion after its increase at the begining of expansion due to rapid combustion. I'm simulating a conventional spark ignition engine with methane fuel. The cylinder in my case is adiabatic wall and I didn't include yet the heat transfer process.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 21:45.