CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

About source term in SORENT.F

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 4, 2001, 09:21
Default About source term in SORENT.F
  #1
Sang-Jin Lee
Guest
 
Posts: n/a
Hi! everyone,

I'm going through hardships in my project involving with Phase change process simulation. I have to solve this problem using STAR-CD. I discreted governing energy equation and get source term by the linearized form in SORENT.F, "S=S1P-S2P*T", as shown below.

SC = DP*[Hold - H + DHDT*T], SP = - DP*DHDT

S1P = SC - (RHO/DT)*Told, S2P = -SP - RHO/DT

I don't know how to get the value of "Hold(Enthalpy) and Told(Temprature)", one time step before. I urgently need the imformation. Anybody know? Please let me know it... Any question, advice or discussion will be welcome!

Thanks in advance.

Sang-jin Lee
  Reply With Quote

Old   November 17, 2001, 11:13
Default Re: About source term in SORENT.F
  #2
star-user
Guest
 
Posts: n/a
You can use posdat.f to take cell and wall data for temperature from one iteration and store that in your user array which can be passed to sorent.f

Contact you Star-CD support and then should be able to provide you with sample coding.
  Reply With Quote

Old   November 21, 2001, 11:52
Default Re: About source term in SORENT.F
  #3
Sang-Jin Lee
Guest
 
Posts: n/a
Thank you for your answer, sir!

I also thought about modification of posdat.f and sorent.f, but I'm not used to do it. I inquired the sample coding as U mentioned to Star-CD support, UK. But no answer so far... I'm under dilemma... Would you please show me the process or coding if it's available to you? Thanks for your advice again.

Sang-Jin Lee

  Reply With Quote

Old   November 24, 2001, 12:14
Default Re: About source term in SORENT.F
  #4
yjl
Guest
 
Posts: n/a
Hi Sang-Jin

For each time step, there are one predictor and several corrector steps for solving the energy equation and sorent.f is called in all the predictor and corrector steps. So you can see the passed field values in the first call for sorent.f are the old values. You can create a local common block to store those values. Make sure you have a indicator here to let you update those old values at the beginning of each time step or in the first call of it. The next question you may ask is how to know it is the first call or it is at the beginning of a new time step. You can use postdat.f or other user subroutines which are called at the beginning of each time step to give you this information. For example, using isstep as the indicator and set isstep=0 in postdat.f. In sorent.f when isstep=0 update your old field values then set isstep=1. Sure, isstep is passed by your local common block.

Have a fun.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Source term chris1980 OpenFOAM Running, Solving & CFD 10 August 27, 2007 07:04
Add a source term into the Y mom. eq. Rucy FLUENT 0 December 12, 2005 05:24
UDF about source term tian FLUENT 3 May 2, 2003 10:17
Source term Allan Siemens 0 September 21, 2001 11:51
UDS source term Mark Richardson FLUENT 1 August 21, 2001 05:41


All times are GMT -4. The time now is 09:04.