CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Reference data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 1, 2002, 06:40
Default Reference data
  #1
Julie Polyakh
Guest
 
Posts: n/a
What should I be guided by choosing the reference data cell?
  Reply With Quote

Old   January 2, 2002, 09:39
Default Re: Reference data
  #2
john
Guest
 
Posts: n/a
Is your flow incompressble or compressble? for incompressible flow, it is not important at all. For compressble flow, it really depends on the combination of boundary conditions used.
  Reply With Quote

Old   January 3, 2002, 06:21
Default Re: Reference data
  #3
Julie Polyakh
Guest
 
Posts: n/a
I deal with laminar compressible flow. My model simulates an opposed jets problem, so the boundary types I use are: inlet (two of them), wall (two of them) and pressure boundary with zero static pressure.
  Reply With Quote

Old   January 4, 2002, 04:08
Default sorry, mistake
  #4
Julie Polyakh
Guest
 
Posts: n/a
I deal with laminar incompressible flow.
  Reply With Quote

Old   January 4, 2002, 06:43
Default Re: sorry, mistake
  #5
john
Guest
 
Posts: n/a
In this case, the reference cell is not important since the pressure will be fixed according to pressure boundary.
  Reply With Quote

Old   May 24, 2002, 15:31
Default Re: compressible....
  #6
ialu
Guest
 
Posts: n/a
Hi. I deal with laminar 2D-compressible flow of small sonic nozzle(critical nozzle).

[B.C] 1)stagnation(p=0.2MPa, T=293K), 2)pressure(p=atmospheric pressure), 3)symmetry, 4)wall.

What should I be guilded by choosing the Reference Data Cell?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reference Values- Reference Area Shivakanth FLUENT 12 June 6, 2017 01:18
Getting Time Series data from saved unsteady data Atul FLUENT 4 November 26, 2008 06:12
Monitoring Reference Data for Air furkan Siemens 2 December 16, 2005 07:58
reference data kris Siemens 2 October 19, 2005 03:22
Where can find airfoil data with pressure distribution or aerodynamic data Ahlo Main CFD Forum 5 January 12, 1999 23:45


All times are GMT -4. The time now is 06:28.