|
[Sponsors] |
January 5, 2002, 15:06 |
High temperature problem
|
#1 |
Guest
Posts: n/a
|
I obtain the temperature values x2 than they should be. What could be the reason? I have just 2 opposing inlets and pressure boundary (outlet, actually). The velocities are low. No chemistry.
|
|
January 5, 2002, 17:24 |
Re: High temperature problem
|
#2 |
Guest
Posts: n/a
|
After I've set the 'Thermal' option for the enthalpy computation the temperature values are OK. But now there is no convergence after 1000 iterations (the enthalpy residual ~0.04).
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
High temperature methane+air | Peter | FLUENT | 5 | January 26, 2009 19:04 |
Ultra high temperature? | bk | Siemens | 2 | July 19, 2005 01:01 |
Temperature is abnormally high! | haiong | FLUENT | 5 | August 29, 2004 03:23 |
Cp for very High Temperature Flows | Arun | FLUENT | 0 | July 13, 2004 13:40 |
Why temperature is so high? | Albert | FLUENT | 2 | June 22, 2003 12:28 |