|
[Sponsors] |
August 13, 2002, 04:58 |
Ignition problem (ICE modelling)
|
#1 |
Guest
Posts: n/a
|
Hi, I'm modelling flow in an IC engine with spark ignition. The Weller model is used for combustion, but when the required time step for combustion is reached, the following warning messages occur, and, looking at the solution(Temperature, Scalar conc, etc.), no combustion takes place.
*** WARNING #042 *** PROCESS NOT FULLY CONVERGED -- EQ.,NIT,RESI: SC1 1 0.88906E-06 *** WARNING #043 *** MINIMUM RESIDUAL AT THE END, RETURNING NON-CONVERGED SOLUTION Can anyone PLEASE help. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ignition problem | Parthiban | Siemens | 0 | May 17, 2008 03:33 |
Problem in Modelling Heat Transfer Problem | Deepak R | FLUENT | 1 | December 6, 2007 10:37 |
Fan Modelling Problem in CFX | Jenny | CFX | 8 | September 11, 2007 14:59 |
Chem. Reaction and Ignition Setting in ICE Problem | Tulus | Siemens | 0 | March 28, 2005 01:02 |
Ignition problem | Julie Polyakh | Siemens | 0 | January 29, 2002 06:39 |