CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Atmospheric Wind Profile - Inlet Subroutine

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 11, 2002, 21:38
Default Atmospheric Wind Profile - Inlet Subroutine
  #1
Roger
Guest
 
Posts: n/a
Hi looking for some help on the above topic.

Has anyone created a user subroutine to model the variation of velocity for an inlet based on the ashrae standard for a typical atmospheric wind profile, typically of the form:

Uh=Umet(Omet/Hmet)^Amet * (H/O)^A where

A = Exponent in power law wind speed profile for local building terrain

Amet = Exponent for the meteorological station

H = Height from ground level (m) Hmet = Height at which meteorological wind speed was measured (normally at 10 m above ground) (m)

Uh = Approach wind speed at upwind wall height (m/s)

Umet = Hourly meteorological wind speed, measured at height (m/s)

O = Fully developed strong wind atmospheric boundary layer thickness (m)

Omet = Atmospheric boundary thickness at the meteorological station (m)

i.e. wind speed for the inlet varies with height up to a maximum of 10m.

Any help appreciated

regards

-roger

  Reply With Quote

Old   December 12, 2002, 06:43
Default Re: Atmospheric Wind Profile - Inlet Subroutine
  #2
raymond
Guest
 
Posts: n/a
I have done much simulation about environment study, with the user subroutine inlet boundary condition. The equation is just the same as you described. It's the function of elevation and quite easy to be applied in the subroutine. I don't know what's the problem of you? The parameters or others?
  Reply With Quote

Old   December 12, 2002, 06:49
Default Re: Atmospheric Wind Profile - Inlet Subroutine
  #3
Roger
Guest
 
Posts: n/a
Not sure how to apply a subroutine in StarCD - unfortunately not very good with fortran code. I believe I have to make one up, or is there a subroutine to pick in the software itself??

thankyou

-roger
  Reply With Quote

Old   December 12, 2002, 11:00
Default Re: Atmospheric Wind Profile - Inlet Subroutine
  #4
CJ Tune
Guest
 
Posts: n/a
Try using the BCDEFI.F subroutine. To use it, set your inlet b/c options=user and click on 'define coding'. There will be a new folder called 'ufile' in your working directory with the file BCDEFI.F in it. Open with your favourite text/Fortran editor. Follow the example script and make use of the X,Y, and/or Z variables to program your inlet velocity as a function of boundary position. Take a peek in the nom.inc file that is also there.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
log law for wind velocity profile Tom P Main CFD Forum 17 February 13, 2016 16:30
Rough baundary in atmospheric wind majidhojjat OpenFOAM Running, Solving & CFD 3 August 18, 2008 12:15
Wind profile tom Phoenics 2 September 28, 2005 11:51
Wind profile Anders Main CFD Forum 1 August 26, 2005 10:07
create logarithmic wind profile for inlet Murat Main CFD Forum 0 December 30, 2003 01:45


All times are GMT -4. The time now is 21:08.