CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   User subroutines (https://www.cfd-online.com/Forums/siemens/53145-user-subroutines.html)

Meiring January 14, 2003 05:51

User subroutines
 
Hi I'm having problems compiling star executables which include user subroutines i.e. bcdefi.f. I'm operating under Windows Xp with Compaq Visual Fotran and not Absoft as recommended. What do I need to do to be able to use the Compaq compiler? Meiring

James January 14, 2003 07:07

Re: User subroutines
 
It is not possible to compile the subroutines with an other fortran compiler because all the absoft fortran libaries are also required.


steve January 14, 2003 21:24

Re: User subroutines
 
Sorry, but Absoft fortran is not recommended. It is required if you want to use user subroutines. If you need a copy, cd-adapco sells it at cost. Its not just the run time libraries, but the entire way in which functions and data are labeled and stored that (may) differ from compiler to compiler.

Meiring January 16, 2003 04:31

Re: User subroutines
 
Thanks for the info. Steve did you mean Absoft NOT recommended? I'll have to purchase Absoft it seems.


steve January 16, 2003 21:23

Re: User subroutines
 
You will have to buy Absoft. It was poor attempt at a joke. I meant that it was not merely a recommendation - it was an absolute requirement.

Meiring January 17, 2003 00:14

Re: User subroutines
 
Very well, thats what I understood, just needed to clarify as such since there are a lot of very confusing, and some not so humourous, ideas and theories flying around about what is recommended vs whats absolutely necessary. Thanks


All times are GMT -4. The time now is 04:54.