CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Compilation problems and file locations

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 4, 2003, 11:41
Default Compilation problems and file locations
  #1
Joel
Guest
 
Posts: n/a
Yesterday i started having problems when running 3.15A under windows, when star is linking and creating the executable i get the message #link error: file not found - formula.obj first it was formula.obj so i tried moving it into the working directory then another and another eventually i had to move a whole bunch of files because star couldnt find them even when they were where they were supposed to be. I have checked my environmentals and they seem fine but it just wont run unless i move all these files. I was playing around with my registry but didnt touch any star-cd stuff but that is when the problem started. any idea what i might have done and how to fix it without copying loads of files everytime i want to run a sim?
  Reply With Quote

Old   February 4, 2003, 13:54
Default Re: Compilation problems and file locations
  #2
kevin
Guest
 
Posts: n/a
in all likelyhood, your LIB variable is not pointing at the necessary STAR-CD library paths
  Reply With Quote

Old   February 5, 2003, 10:27
Default Re: Compilation problems and file locations
  #3
Joel
Guest
 
Posts: n/a
nope all the lib environmentals are fine, any other ideas?
  Reply With Quote

Old   February 11, 2003, 13:42
Default Re: Compilation problems and file locations
  #4
kevin
Guest
 
Posts: n/a
you should open a command prompt and do a set > setout and use a text editor to look at the setout file...I'm pretty sure you will find that your LIB variable is not set right...which is why it can't find formula.obj...probably you have LIB set in both the user environment variable section and the system environment variable section...watch out...windows will use the user variable setting to override the system variable setting.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems in personal library compilation shrina OpenFOAM 3 February 23, 2009 12:12
Specifying probe locations in controlDict using dictionary file vincent OpenFOAM Bugs 3 December 31, 2008 05:25
UDF compilation problems MateuszZb FLUENT 4 October 20, 2008 03:46
PROBLEMS WITH THE COMPILATION oscar_j OpenFOAM Running, Solving & CFD 6 July 18, 2007 22:41
Compilation error with C++ header file Jack Martinez FLUENT 3 June 16, 2007 10:27


All times are GMT -4. The time now is 12:32.