CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Relaxation factor

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 21, 2003, 02:07
Default Relaxation factor
Posts: n/a
Hi all !! I have a problem about Relaxation factor. In solver parameter of STAR GUIde, the default value of relaxation factor is 0.7(umom,vmom,wmom),0.2(pressure),0.7(turb KE, turb Diss). If i cut down or raise the value of relaxation factor, is it influence on convergence? My model is axial fan. What value of relaxation factor is profit to my model?

  Reply With Quote

Old   June 13, 2003, 11:13
Default Re: Relaxation factor
Posts: n/a
Hi! You can cut down for velocities (first number). If your solution will diverge, you can play with pressure (cut down). Another values can be as default. If you will make it realy low, it will take much more time and iterations to complete calculations. Good luck! Birute
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
what is under relaxation factor? rayy FLUENT 30 September 6, 2020 01:06
relaxation factor adam Main CFD Forum 3 February 4, 2008 10:10
under relaxation factor novice Siemens 2 November 28, 2005 04:18
help in relaxation factor SONALI FLUENT 5 August 11, 2005 20:27
Under Relaxation Factor AB Siemens 0 November 29, 2004 13:56

All times are GMT -4. The time now is 01:52.