CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Restart with ProHPC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 9, 2003, 10:37
Default Restart with ProHPC
  #1
Julie Polyakh
Guest
 
Posts: n/a
Hi,

Does anybody know how to restart a case with ProHPC?

Regards,

Julie
  Reply With Quote

Old   June 9, 2003, 17:17
Default Re: Restart with ProHPC
  #2
TomK
Guest
 
Posts: n/a
Basically it is done the same as a restart with star. From the prostar gui guide select restart and save your problem file. Then, if you are restarting from an HPC run, just use the HPC gui to write files again. If you are starting from a single processor, in the HPC gui there is a section that allows you to split your .pst file for each processor. Note that the .pst file must be there even if you are doing a transient, because that is where your restart data is. If you are doing a transient, if you leave the .pstt file on the node, it will append to it. This could end up causing a file too large to be read with some versions of UNIX and LINUX.

After re-reading this, I am sure that I have made it clear as mud. If you have a specific question I can try to address it. Actually, though, like almost everything, it is a pretty easy process once you have done it the first time.

Good luck, TomK
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Restart selim CFX 1 August 21, 2007 14:43
Restart furkan Siemens 3 February 14, 2006 16:57
Restart Orit Friedman Main CFD Forum 1 December 29, 2005 14:41
Urgent: Help on ProHPC Sachin S Deshmukh Siemens 5 August 3, 2004 07:24
restart Jane Siemens 2 March 26, 2004 02:33


All times are GMT -4. The time now is 22:30.