|
[Sponsors] |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
Actually We are working in transient analysis of first stage Gas turbine Nozzle with Prostar.
I have a question in the way we want set the boundary conditions, this because we are working the input region with a table option (R=radial position of the blade lengt[mm], TEMP, DEN, V)I mean, the table contains 4 parameter R=independet variable, (TEMP,DEN,VElocity=dependent variable). In the case of transient, I need another aditional table with a new dependent variable..the time, I want to set the boundary condition ![]() Actually I have results with boundaries depending of Radial position....But we need both independent variables (time and Radial pos.) Another problem is a error message that appears : ERROR #211 *** INSUFFICIENT DIMENSIONS FOR THE CONDUCTIVITY ARRAY.INCREASE PARAMETER NCTMXC OR NBTMXC AND RECOMPILE. ?????I had increased this parameters in the parm.inc, but the problem still appears..... Iīd appreciate any information yuo can give me... best regards Alejandro Hernandez Rossette MEXICO |
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
Hi Why donīt you try with bcdefi.f user subroutine? Reagrding the parameters, you have to increase them from within prostar. Best regards Roadracer
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transient Problem | Noureddine | CFX | 3 | August 18, 2008 14:47 |
Transient problem! | Jamesdclimber | CFX | 8 | February 11, 2005 15:43 |
transient problem | leo | Siemens | 3 | February 13, 2003 01:28 |
transient problem | susan | Main CFD Forum | 3 | December 5, 2002 12:06 |
Transient Problem | Sundar | FLUENT | 1 | May 7, 2002 07:34 |