What is this status message

July 30, 2003, 00:29

Hi,

When I use Generate Mesh in Aerodynamic Mesh Wizard I get this message and program stop.

"MesgGen 1 of 2 - Holding for Available Processor"

How can I solve that?

Thanks,

July 30, 2003, 10:41

You probably selected, under your mesh generation tab, to split your model into multiple (in this case 2) subdomains for mesh generation. This is a feature only in the newest ProAM (and ES-series) where you can split mesh-generation jobs between multiple CPUs and hence do it much faster (or with less memory with a single CPU). Should be harmless unless it hangs for a very long time. You should check your process listing just in-case.

July 31, 2003, 01:25

Hi

Can i do this split meshing using PRO AM release 521 or does it require a parallel version of PRO AM also

July 31, 2003, 02:54

I'm not sure if there's a 'parallel' version of ProAM but the subdomain meshing works on r521 on my single CPU machine using the existing license for r519.

July 30, 2003, 00:29	What is this status message	#1
David Baker Guest Posts: n/a	Hi, When I use Generate Mesh in Aerodynamic Mesh Wizard I get this message and program stop. "MesgGen 1 of 2 - Holding for Available Processor" How can I solve that? Thanks,

July 30, 2003, 10:41	Re: What is this status message	#2
cjtune Guest Posts: n/a	You probably selected, under your mesh generation tab, to split your model into multiple (in this case 2) subdomains for mesh generation. This is a feature only in the newest ProAM (and ES-series) where you can split mesh-generation jobs between multiple CPUs and hence do it much faster (or with less memory with a single CPU). Should be harmless unless it hangs for a very long time. You should check your process listing just in-case.

July 31, 2003, 01:25	Re: What is this status message	#3
Askmat Guest Posts: n/a	Hi Can i do this split meshing using PRO AM release 521 or does it require a parallel version of PRO AM also

July 31, 2003, 02:54	Re: What is this status message	#4
cjtune Guest Posts: n/a	I'm not sure if there's a 'parallel' version of ProAM but the subdomain meshing works on r521 on my single CPU machine using the existing license for r519.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Path status in DPM BC UDF	HS	FLUENT	4	June 12, 2014 07:12
Status of FV versus FEA research in CFD	diaw	Main CFD Forum	8	February 11, 2005 00:52
VOF status	Paul	Main CFD Forum	6	June 30, 2003 20:26
What's the status of Unsteady design of Turbomachi	Ji Lucheng & Chen Jiang	Main CFD Forum	0	December 24, 2002 03:44
Viscosity and equation status	Mir	Siemens	3	June 13, 2002 13:39