CFD Online Logo CFD Online URL
Home > Forums > Siemens

Problems with different boundaries

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 24, 2003, 12:00
Default Problems with different boundaries
Posts: n/a

I have a problem with my boundary conditions. I'm working with the multi reference frame and two pressure boundaries pressure at regi 1, and regi 2; options are default. With regi 1=0 and regi 2=0 the result is very good and the airflow [m^3/h] is also realistic. But with regi 1 =1 and regi 2=86 the calculation diverges.

thank you

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
ParaView Postprocessing problems with cyclic boundaries christian OpenFOAM Paraview & paraFoam 10 June 26, 2009 05:49
Problems with Fluent on simple 1D problems agg FLUENT 3 November 21, 2008 12:55
UDF and boundaries deneb FLUENT 1 October 24, 2008 03:32
Problems with cyclic boundaries in blockMesh marhamat OpenFOAM Native Meshers: blockMesh 1 April 17, 2007 10:06
problems replacing old boundaries Jared Siemens 4 August 5, 2005 19:36

All times are GMT -4. The time now is 07:02.