 |
 |
 |
|
|
|
[Sponsors] | ||||
April 23, 2004, 03:37
|
Plotting a register data
|
#1 |
|
Guest
Posts: n/a
|
Hi,
How do I plot calculated scalar data from register 6, for example? Regards, Julie |
|
|
||
|
April 23, 2004, 05:28
|
Re: Plotting a register data
|
#2 |
|
Guest
Posts: n/a
|
In short, you can't: you have to move it to register 4 first (or registers 1,2 and 3 if it is vector data).
You can move data around from one register to another by using the "oper" command. e.g. oper copy 6 4 will copy the information in register 6 to 4. Data in 4 can then be plotted as a contour. You can access the GUI version of this command by going to "Lists > Post Registers ... > Operate ..." |
|
|
|
||
|
April 23, 2004, 09:27
|
Re: Plotting a register data
|
#3 |
|
Guest
Posts: n/a
|
Ok. And how do I plot it from the register 4?
Julie |
|
|
|
||
|
April 23, 2004, 10:35
|
Re: Plotting a register data
|
#4 |
|
Guest
Posts: n/a
|
just go to post-processing file/ creat plot and plot it to screen or to a file !
|
|
|
|
||
|
April 23, 2004, 11:01
|
Re: Plotting a register data
|
#5 |
|
Guest
Posts: n/a
|
But I have to get a data first! How do I load the data from the register 4?
Julie |
|
|
|
||
|
April 26, 2004, 10:14
|
Re: Plotting a register data
|
#6 |
|
Guest
Posts: n/a
|
post processing will automatically (or only) plot from reg 4. Just copy the data to reg 4 which u want to plot and go to create plots in user guide and plot.
|
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| plotting field data | thomas | Siemens | 5 | November 16, 2006 19:09 |
| Plotting raw data values | Wilesco | Siemens | 0 | January 5, 2006 06:34 |
| Psot register data | Prabodh | Siemens | 8 | April 23, 2004 02:48 |
| How to get data out from register? | leo | Siemens | 1 | May 2, 2003 09:16 |
| Saving graph register data into a file | Julie Polyakh | Siemens | 1 | January 27, 2003 22:35 |
Linear Mode
