CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Energy balance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 5, 2004, 01:39
Default Energy balance
  #1
Julie Polyakh
Guest
 
Posts: n/a
Hello,

Does somebody know how to calculate energy balance at two cross sections (not inlets or outlets)?

Best Regards,

Julie
  Reply With Quote

Old   July 5, 2004, 04:22
Default Re: Energy balance
  #2
Richard
Guest
 
Posts: n/a
In v3.20 there's a new thing called internal boundaries which can do this.
  Reply With Quote

Old   July 5, 2004, 04:40
Default Re: Energy balance
  #3
Julie Polyakh
Guest
 
Posts: n/a
And what about v3.150A?..
  Reply With Quote

Old   July 5, 2004, 07:15
Default Re: Energy balance
  #4
Thomas
Guest
 
Posts: n/a
what about calculating the enthalpy difference (cp *dT) between these two cross sections?

  Reply With Quote

Old   July 5, 2004, 09:23
Default Re: Energy balance
  #5
Julie Polyakh
Guest
 
Posts: n/a
Nice, but in my simulation Cp=Cp(T). Which Cp value should I take in such a case?
  Reply With Quote

Old   July 5, 2004, 14:50
Default Re: Energy balance
  #6
Panos
Guest
 
Posts: n/a
You can use the formula Cp=a+bT+cT^2+dt^3 where the constants can be found in any book of physics and chemistry or thermodynamics. hope it is helpful
  Reply With Quote

Old   July 5, 2004, 14:52
Default Re: Energy balance
  #7
4xF
Guest
 
Posts: n/a
You could try to write a macro for integrating between two surfaces mdot*Cp*T = H, where H is the enthalpy, T is the temperature, Cp is your local Cp(T) and m is the mass flux (mdot= rho*S*V, S is the surface, V is the velocity). Ask also your local support office, they MUST have a macro ready for that.
  Reply With Quote

Old   July 6, 2004, 04:19
Default Re: Energy balance
  #8
Thomas
Guest
 
Posts: n/a
yes ans you can also use the operate command for this. you have 6 post registers to do this operation, thast should be enough!

  Reply With Quote

Old   July 7, 2004, 04:58
Default Re: Energy balance
  #9
Julie Polyakh
Guest
 
Posts: n/a
Yes, Panos, I know. But there is also the chemical energy of unburned fuel that I have to take into account.

Regards,

Julie
  Reply With Quote

Old   July 7, 2004, 05:00
Default OK. Thanks
  #10
Julie Polyakh
Guest
 
Posts: n/a
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Energy Balance Harshad CFX 0 March 5, 2008 07:36
k-epsilon ENERGY balance Jeremie FLUENT 0 March 24, 2007 08:46
Energy balance? HP FLUENT 13 September 12, 2005 15:22
Energy Balance Cholo FLUENT 0 April 9, 2004 14:53
Energy balance Eric FLUENT 1 February 17, 2004 20:33


All times are GMT -4. The time now is 22:02.