CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Density out of bound

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 22, 2004, 08:40
Default Density out of bound
  #1
Prashant Khare
Guest
 
Posts: n/a
can some one help me? I am solving a turbomachinary problem with compressible flow..density as a function of pressure and temprature.There is a warning in info file that density is out of bound due to pressure correction at cell.. limiter applied. please i am not able to understand what should i have to do. Thanks in advance for any help
  Reply With Quote

Old   July 22, 2004, 09:15
Default Re: Density out of bound
  #2
Sébastien ERNANDES
Guest
 
Posts: n/a
Everyone has already had this warning....... I'm a novice as StarCD user, but I propose to you : - try to decrease your time step (have a look about 'Courant Number' in the user guide). - try to launch your run in double precision. - verify your molecular properties (Density : ideal f(T,P) / Viscosity : Multicomp. / Specific Heat : Polynomial / Conductivity : Multicomp. ).

Maybe decrease some relaxation factors could be helpful, but I'm not sure...

Good luck.
  Reply With Quote

Old   July 22, 2004, 09:23
Default Re: Density out of bound
  #3
Prashant Khare
Guest
 
Posts: n/a
Thank you for your reply but i am solving a steady state flow and i am also using low pressure relaxation factor(0.03).Can any other reasons possible?
  Reply With Quote

Old   August 1, 2004, 23:35
Default Re: Density out of bound
  #4
xhliu1
Guest
 
Posts: n/a
You can try transient solving. Good wishes!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create an upper bound daniel_mills OpenFOAM Running, Solving & CFD 0 October 20, 2006 19:34
*** WARNING #060 *** DENSITY OUT OF BOUND DUE T varun Siemens 0 March 25, 2005 17:19
Bound node loop. Jack Keays FLUENT 5 July 9, 2000 14:57
Low Re k-e model bound. conds Abhijit Tilak Main CFD Forum 1 October 7, 1999 06:31
Compressible N-S bound. condn. Kuttoosan Main CFD Forum 1 July 6, 1999 13:46


All times are GMT -4. The time now is 18:12.