|
[Sponsors] |
September 14, 2004, 14:21 |
How to correct the errors and warnings??
|
#1 |
Guest
Posts: n/a
|
Hello,
I started again and made the model for tutorial 11.1 with star-cd V3.2 but I have some errors due to which i am having warnings while writing geometry file. The errors and warnings are: *error-74 there are cracks in the model *error-265 model has groups of disconnected cells Begining geometry write to file tut11 geom ** warning- no cell found for boundary 375 in region 5 ** warning- no cell found for boundary 378 in region 5 Boundary set cleared ** warning- 2 boundaries not found on any cell in the model guys, help me out.. can anyone tell me how to overcome these errors?? Thanks in advance, AB |
|
September 28, 2004, 06:55 |
Re: How to correct the errors and warnings??
|
#2 |
Guest
Posts: n/a
|
Hi,
error-74: - check the grid in the NavCenter - let it generate a new cset from the error cells (cracks) - first merge (using vmerg) the vertices - find out if there are double cells overlapping. error-265: - that belongs to the previous error there are some boundary faces for region 5 defined of cells which are already deleted. remove all the boundary of that inlet or outlet and generate new one. I hope that helps Hubert |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WARNINGS I don't want to have | Gabriel | Siemens | 3 | August 10, 2007 18:04 |
Not to display warnings? | Yasser Nabavi | FLUENT | 3 | June 4, 2006 09:27 |
WARNINGS | DB | Siemens | 0 | January 19, 2006 14:47 |
Warnings | Dave | Siemens | 2 | November 9, 2005 22:08 |
lots of warnings | Arnab | Siemens | 2 | January 27, 2005 16:36 |