|
[Sponsors] |
November 18, 2004, 14:37 |
.run file & .info file
|
#1 |
Guest
Posts: n/a
|
Hello,
What is the importance of .run file and .info file? For transient calculations we should have some convergence in each iteration but .run file only shows residuals of some standard parameters on the monitoring cell specified by the user. So where can I see and monitor the convergence of each iteration of a transient or pseudo transient simulation?? what can we understand and extract from .info file?? Also I want to know what is the importance and relevance of reference pressure and reference temperature on the reference pressure cell as specified under Monitoring and Reference Data (under Thermophysical Models and Properties folder). What does this do and how does it affect my simulation?? Will be waiting for replies and comments, Thanks, Xobile |
|
November 19, 2004, 02:05 |
Re: .run file & .info file
|
#2 |
Guest
Posts: n/a
|
hi,
WHen you do the transient analysis, main controll is timestep.inner iterations or sweeps are specified and convergance for each timestep depends upon number of factor such as number of sweeps,residualtolerance,max corrector stages etc. For detail study the STARCD theory mannual and refer some books. in case of compressible flow reference pressure is very important and its location should be at a place where pressure is known. For details refer to STARCD theory mannual and users guide |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PLOT3D ASCII solution file to MATLAB data file | Sandeep Rana | Main CFD Forum | 4 | June 11, 2010 10:48 |
[OpenFOAM] ParaView exiting while trying to save image file or movie file | 21kalee | ParaView | 3 | January 23, 2008 17:01 |
warning in file star.info | george | Siemens | 4 | March 20, 2007 04:32 |
Missing info from CFX 10 help file ? | Pete | CFX | 4 | April 19, 2006 14:42 |
warning #038 in .info file | David Aquilina | Siemens | 5 | February 28, 2003 05:17 |