CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

.run file & .info file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 18, 2004, 14:37
Default .run file & .info file
  #1
Xobile
Guest
 
Posts: n/a
Hello,

What is the importance of .run file and .info file?

For transient calculations we should have some convergence in each iteration but .run file only shows residuals of some standard parameters on the monitoring cell specified by the user.

So where can I see and monitor the convergence of each iteration of a transient or pseudo transient simulation??

what can we understand and extract from .info file??

Also I want to know what is the importance and relevance of reference pressure and reference temperature on the reference pressure cell as specified under Monitoring and Reference Data (under Thermophysical Models and Properties folder).

What does this do and how does it affect my simulation??

Will be waiting for replies and comments,

Thanks,

Xobile
  Reply With Quote

Old   November 19, 2004, 02:05
Default Re: .run file & .info file
  #2
sankar
Guest
 
Posts: n/a
hi,

WHen you do the transient analysis, main controll is timestep.inner iterations or sweeps are specified and convergance for each timestep depends upon number of factor such as number of sweeps,residualtolerance,max corrector stages etc.

For detail study the STARCD theory mannual and refer some books.

in case of compressible flow reference pressure is very important and its location should be at a place where pressure is known. For details refer to STARCD theory mannual and users guide
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PLOT3D ASCII solution file to MATLAB data file Sandeep Rana Main CFD Forum 4 June 11, 2010 10:48
[OpenFOAM] ParaView exiting while trying to save image file or movie file 21kalee ParaView 3 January 23, 2008 17:01
warning in file star.info george Siemens 4 March 20, 2007 04:32
Missing info from CFX 10 help file ? Pete CFX 4 April 19, 2006 14:42
warning #038 in .info file David Aquilina Siemens 5 February 28, 2003 05:17


All times are GMT -4. The time now is 07:15.