CFD Online Logo CFD Online URL
Home > Forums > Siemens

Error in moving mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 18, 2005, 13:42
Default Error in moving mesh
Posts: n/a
While running pmovlink this error is coming..."*** ERROR *** CELL 20641 HAS BOUNDARIES ON BOTH COLLAPSING SIDES 2 AND 1"......Boundary reg are attach reg:2 for valve and reg:1 for cylinder(attach)...How to rectify this kind of error..
  Reply With Quote

Old   January 19, 2005, 04:21
Default Re: Error in moving mesh
Posts: n/a
You need to change the way you have defined the mesh motion. When you collapse a cell layer, you are "unextruding" it, so it has to be made of cells which could have been created by extrusion (i.e. prism or a hex). The two opposite sides which you are collapsing onto each other cannot both have boundaries on them: this is what the error is telling you.
  Reply With Quote

Old   January 20, 2005, 11:49
Default Re: Error in moving mesh
Posts: n/a
Hi The mesh which i m using is already made by extrusion from shell.The valve bottom side cells contain two attach boundaries,one for itself and another for suction port.Is it because i m detaching the side boundary attached to the bottom layer of valve bottom side cells? somnath
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
a error for moving mesh RX Siemens 1 December 7, 2006 13:29
Error in moving mesh sasikumar Siemens 0 January 10, 2005 07:44
Error while doing moving mesh Harendra Siemens 2 January 10, 2005 07:34
moving mesh error. dorain Siemens 0 December 7, 2004 01:50
moving mesh error leo Siemens 1 September 12, 2002 20:56

All times are GMT -4. The time now is 02:26.