|
[Sponsors] |
January 19, 2005, 05:02 |
connectivity check
|
#1 |
Guest
Posts: n/a
|
hello star cd users,
another question, i've got a large model 1.3M cells and upon running the mesh check facilities, the tool reports back that i have the following warnings/errors 27 cells faces found that are both in a couple and connected to another cell, these errors must be fixed before connectivity check can continue and 13 cells found that seem to reside inside other cells i think both these problems are related? has any user got any advice for me, so that i can correct these errors and run my model thanks for any help -ted |
|
January 20, 2005, 00:59 |
Re: connectivity check
|
#2 |
Guest
Posts: n/a
|
Hi,
u delete the couple related to the connected cell, and rucn check again, sankar |
|
January 20, 2005, 09:13 |
Re: connectivity check
|
#3 |
Guest
Posts: n/a
|
thanks sankar,
i managed to delete the problem couples and generated the geom and problem files, the model appears to be running fine, do i need to worry about some warnings when generating the geometry file, if there is only a handfull of warnings it should be okay to ignore them? thanks again -ted |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
cell connectivity file | Marcin | Siemens | 0 | August 15, 2007 17:35 |
MRF with mesh connectivity | Mac | Siemens | 1 | May 1, 2006 07:28 |
about the cell connectivity | limingtiger | Siemens | 3 | August 24, 2005 02:51 |
Cell check and Boundary check errors | AB | Siemens | 4 | October 28, 2004 13:04 |
please help in connectivity | nikhil | Siemens | 0 | December 10, 2002 05:01 |