CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   How to solve the problem for table and Les? (https://www.cfd-online.com/Forums/siemens/54407-how-solve-problem-table-les.html)

Ben Lu March 1, 2005 03:23

How to solve the problem for table and Les?
 
My model is the pipe form.There are two inlets and vertical each other,and one outlet.Time Domain is transient and turbulence model set is LES/smagorinsky.The curve of two inlet velocities are developed flow,and the values are used by tables in option of Define Boundary Region.Differencing scheme select "CD".After i start apply the "start new analysis",Startcd shows the error" error occurs in readying table.Form the proble file.its data is ingnored".And When th turbulence model is K-E/High reynolds and velocity used by table,Starcd didn't shows above error and could run to result.How to slove the error please? thanks


All times are GMT -4. The time now is 11:18.