negative density
Hi All,
My run is coming out by giving -ve density error. The fluid is air with compressible setting on. In the geometry there is 0.9 mm gap through which air is flowing and pressure drop is around 5 bar. Is this the reason for -ve density error. My mesh is tetra and I have kept 3 cells in the 0.9 mm gap. I use MARS scheme. Kindly guide. Thanks |
Re: negative density
you might try using UD scheme when starting from scratch and then move onto MARS discretisation scheme, it may help
-ted |
All times are GMT -4. The time now is 15:12. |