CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

problem in large scale model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 30, 2005, 03:59
Default problem in large scale model
Posts: n/a
my model is 5000*5000*100000 (mm*mm*mm), and there is a hole (diameter 50mm *100000mm) in the center, the hot fluid flows in the pipe. the mesh is very coarse at the outside of the model about 100mm, and about 10mm in the innerside. the velocity distribution is abnormal, that is the speed at the part of inlet is right, but it becomes zero slowly at about 10 meters. the velocity at the inlet is about 100 m/s, the k-e model is high renolds, what's the matter?
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help: Computers for large scale simulation sarah_ron2002 Main CFD Forum 9 December 20, 2007 10:17
How to simulate a large scale body? stefanie FLUENT 2 March 29, 2007 12:19
Large Scale Model:Small scale computer gull Main CFD Forum 0 March 5, 2007 07:37
About Large Scale Domains Swarup FLUENT 10 October 4, 2006 23:09
Large Scale Model Douglas Lau FLUENT 1 January 14, 2004 18:02

All times are GMT -4. The time now is 16:32.