|
[Sponsors] |
October 28, 2005, 10:05 |
how to define the porosity
|
#1 |
Guest
Posts: n/a
|
I use the following command to define the porosity, but the system keep the porosity to be 0. how to deal with the problem. ctab,4,solid,7,0.1,4,1,1,1,0,off,0,light ctname,4,soil
MESH*> ctab,4,solid,7,0.1,4,1,1,1,0,off,0,light CELL TABLE NUMBER 4 IS SOLI NAME = soil COLOR INDEX = 7 POROSITY INDEX = 0 MATERIAL NUMBER = 4 SPIN INDEX = 1 GROUP NUMBER = 1 LIGHTING MATERIAL = 1 RADIATION = OFF CONDUCTION THICKNESS = 0.000000 INITIAL FREE SURFACE MATERIAL IS LIGHT MESH*> ctname,4,soil NAME OF CELL TABLE 4 IS soil |
|
October 28, 2005, 11:36 |
Re: how to define the porosity
|
#2 |
Guest
Posts: n/a
|
you can't have a solid that is porous. change your cell type to fluid
|
|
October 30, 2005, 03:10 |
Re: how to define the porosity
|
#3 |
Guest
Posts: n/a
|
dear allan, when I change the command, the same problem happend,how can deal with it? ctab,4,fluid,7,0.5,4,1,1,1,0,off,0,light CELL TABLE NUMBER 4 IS FLUI
NAME = soil COLOR INDEX = 7 POROSITY INDEX = 0 MATERIAL NUMBER = 4 SPIN INDEX = 1 GROUP NUMBER = 1 LIGHTING MATERIAL = 1 RADIATION = OFF CONDUCTION THICKNESS = 0.000000 INITIAL FREE SURFACE MATERIAL IS LIGHT MESH*> ctname,4,soil NAME OF CELL TABLE 4 IS soil |
|
October 30, 2005, 07:30 |
Re: how to define the porosity
|
#4 |
Guest
Posts: n/a
|
by Jove !!
you have to give a porosity index 1 in your ctab then you have to define the porosity 1 under thermophysical models (resitstance ..) you have to suply alpha and betas then it should work it is described in the tutorials ! |
|
November 1, 2005, 03:01 |
Re: how to define the porosity
|
#5 |
Guest
Posts: n/a
|
thank you for your help
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
define mass transfer - define source | greg | FLUENT | 4 | November 24, 2018 07:34 |
Define porosity | laisquared | FLUENT | 3 | February 24, 2012 05:43 |
More than 1 porosity value possible | achimfrahmmunterscom | OpenFOAM Running, Solving & CFD | 2 | February 12, 2009 08:36 |
How to define porosity ? | Jaimin | CFX | 0 | February 4, 2006 11:32 |
define my own DEFINE macro? to model pithing naca | calogero | FLUENT | 0 | April 10, 2003 06:10 |