CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

How to change BC in transient analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 28, 2005, 18:50
Default How to change BC in transient analysis
  #1
Dhruv
Guest
 
Posts: n/a
I am trying to run a transient case in which I need to change the BC from inlet to wall at various times. Earlier Mr. Lee asked the same question and Mr Zhang mentioned that a subroutine can be used. Can anybody tell me which subroutine(name of the subroutine file) to use and if they can give some sample coding that would be really helpful.

Thanx in advance.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Change mesh topology during transient run Alex77 CFX 2 October 31, 2007 03:35
transient analysis? muro FLUENT 0 October 1, 2007 01:45
Transient analysis Andy F CFX 8 January 6, 2006 10:55
transient analysis novice Siemens 1 December 25, 2005 23:15
transient analysis mehul CFX 0 December 7, 2005 07:52


All times are GMT -4. The time now is 01:05.