CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Help~ Pressure boundary seting by using *.tbl

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   November 19, 2005, 09:22
Default Help~ Pressure boundary seting by using *.tbl
Posts: n/a
Hellow~ The data used for setting the relation of pressure versus time are described as follows(content of *.tbl file): ---------------------------------------------------- TABLE 20-0.1 LOCAL 1 VOPTION ERROR INDEPENDENT TIME 3 TIME 0.00000 3.22586 6.451613 PR 1645.0 -1451.9 917.85 ---------------------------------------------------- The above includes three pressure-time data for simplification, but it was found that when the data exceed 32 (time VS pressure)values in the *.tbl file, the relation of time and pressure can't be plotted by using GRAPH, then the message "segmentation fault" aprrears. It seems that in the file more than 32 PR vs time data are not allowed, but it's not reasonable, isn't? Or if there is any other suggestion, please tell me... thanls a lot!! ^^

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help~ Pressure boundary seting by using *.tbl(new) amogo Siemens 0 November 19, 2005 09:26
Seting up pressure boundaries Nori FLUENT 0 September 13, 2005 10:43
seting values for coefficients and parameters Arvanitidis Mark Phoenics 0 June 3, 2003 07:45
Seting Boundary Condition in Polar Uttam Sen Phoenics 1 March 28, 2003 06:56
Seting up star on linux Joel Siemens 1 April 15, 2002 11:08

All times are GMT -4. The time now is 06:07.