CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Prosurf to Proam problems, help please

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 23, 2006, 11:03
Default Prosurf to Proam problems, help please
  #1
William Wallace
Guest
 
Posts: n/a
Hello everyone, I'm currently a student at university doing my final year project on the analysis of an engine intake system, basically its a mid engined supercar and my aim is to analise it in the current forum both in the wind tunnel and in CFD then redesign it and compare results.

Ok now I'm very new at using this software (V3.150A) and am having trouble importing the files from prosurf into proam. On importing the iges file into prosurf there are obviously a lot of errors. I've ran auto repair varying the tolerances until the errors are at the minimum amount that I can get them to. My problem is that I still have 199 free curve errors but when I generate the surface grid no errors are shown other than the curve errors.

Here's a grab of the model prior to the grid

http://img.photobucket.com/albums/v8...0/prosurf1.jpg

And after the grid

http://img.photobucket.com/albums/v8...0/prosurf2.jpg

Now I save the prosurf files as prostar .vrt and .cell files but when I go to import them into Proam the screen just goes white and displays the following in the output window;

PRO *> !************************************************* **********!

PRO *> !* *!

PRO *> !* PROSTAR INITIALIZATIONS: FILE PROINIT *!

PRO *> !* *!

PRO *> !* THIS FILE CONTAINS ALL COMMANDS RUN BY PROSTAR ON *!

PRO *> !* STARTUP. *!

PRO *> !* EDIT THIS FILE TO INCLUDE/EXCLUDE COMMANDS AS *!

PRO *> !* NECESSARY *!

PRO *> !* PRO *> !************************************************* **********!

PRO *> !

PRO *> !OPEN NOVICE PANEL

PRO *> OPANEL,TOOL ENTER A TOOL NAME

OPAN*> EASY

PRO *>

PRO *> no library has been specified for Tcl on line 1 in init.tcl dbase,open KZ1 Air Intake.dbs

AMM *> dbase,list

AMM *> tcl,done

AMM *> tcl,done

AMM *> tcl,done

AMM *> tcl,done

AMM *> tcl,done

AMM *> view,1,1,1

VIEWING DIRECTION FOR PLOT IS: 1.00000 1.00000 1.00000 IN GLOBAL COORDINATE SYSTEM

PLOT*> MEMOR MAXBRK 30000$MEMOR WRITE **NOTE - ALLOCATING MEMORY **NOTE - CHANGED PARAMETER MAXSC1 FROM 360000 TO 3002148 **NOTE - CHANGED PARAMETER MAXINF FROM 1252433 TO 1724357 **NOTE - ALLOCATING MEMORY **NOTE - CHANGED PARAMETER MAXSC2 FROM 2516915 TO 3460762 **NOTE - CHANGED PARAMETER MAXBRK FROM 3558 TO 30000

PRO *>

WROTE CURRENT PARAMETERS TO FILE param.prp OLD param.prp MOVED TO param.bak

PRO *> *IF DEBUG NE 1$OFILE,"./tmp/IMPORT_LOG.TMP"$*ENDIF $! SUPPRESS OUTPUT

PRO *>

PRO *>

PRO *> ! SUPPRESS OUTPUT

PRO *> safety error off

PRO *> tcl,done

AMM *> close, ./KZ1 Air Intake.cel

PRO *> plty,ehid$light 1 on center

PLOT*>

PLOT*> plme,on

PLOT*> window 0,0,15,15$pldi,off,info$lswitch shade

PLOT*>

PLOT*>

PLOT*> clrmode reverse

PLOT*> vstyle,3,6,0

PLOT*> zoom,off

PLOT*> angle,,

PLOT*> cdis,off,all

PLOT*> direction read

CONV*> *get mxco mxce

CONV*> cset,,$vset,news,cset$*get mxve mxve

PLOT*>

PLOT*>

PLOT*> cread "./KZ1 Air Intake.cel" mxve,,,add,Coded,,50

MESH*> vread "./KZ1 Air Intake.vrt" mxve,,,Coded

MESH*> *get mxce mxce

MESH*> cset,news,,mxco + 1,mxce

PLOT*> *IF DEBUG NE 1$OFILE NONE$*ENDIF $! SUPPRESS OUTPUT

PLOT*> clrp 20 1000 nplot clrt geom 1 1,1,1 clrt geom 2 1.,0,0 clrt geom 3 0,1,0 clrt geom 4 .0,0,1 clrt geom 5 1.0,0.5,0.0 clrt geom 6 0.7,0.5,0.7 clrt geom 7 0.9,0.8,0.5 clrt geom 8 0.5,0.5,0.7 clrt geom 9 0.5,0.7,0.5 clrt geom 10 0.55,0.5,0.5 clrt geom 11 0.7,0.5,0.5 clrt geom 12 0.,1.,1. clrt geom 13 1.,0.,1.0 clrt geom 14 1.,1.,0 clrt geom 15 0.5,0.5,0.9 clrt geom 16 0.5,0.92,0.7 clrt geom 17 0.8,0.9,0.8 clrt geom 18 0.7,0.6,0.7 clrt geom 19 0.57,0.8,0.9 clrt geom 20 0.7,0.3,0.38 lmat,1,.2 ofile,screen OUTPUT SWITCHED TO SCREEN

PRO *> safety error on ERROR LISTING WILL BE SUMMARIZED

PRO *> close "./tmp/IMPORT_LOG.TMP" FILE ./tmp/import_log.tmp CLOSED

PRO *> batch,on BATCH MODE TURNED ON

PRO *> count,cell

NO CELLS DEFINED

UTIL*> batch,off BATCH MODE TURNED OFF

PRO *> tcl,done

AMM *> tcl,done

AMM *> pltb,on PLOT IN BACKGROUND THEN POP TO DISPLAY

PLOT*> cplot **WARNING - NO CELLS SELECTED FOR PLOTTING **ERROR - NO ITEMS SELECTED FOR PLOTTING

PLOT*> pltb,off PLOT DIRECTLY TO THE DISPLAY

PLOT*> tcl,done

AMM *> tcl,done

AMM *> setw,IMPORTSET.TMP,1 WRITING CURRENT SET DATABASE TO FILE importset.tmp WITH IDENT= 1 WRITE COMPLETED

UTIL*> close,all FILE ./kz1 CLOSED

PRO *> tcl,done

AMM *> tcl,done

Sorry to bombard you guys/girls with all this info but I thought it would give a better indication where I'm going wrong. I'm running 32 bit windows XP.

Regards

William Wallace
  Reply With Quote

Old   January 25, 2006, 15:01
Default Re: Prosurf to Proam problems, help please
  #2
Fr Ted Crilly
Guest
 
Posts: n/a
sorry dude, not sure if this will help but in my experience you are better get rid of all the warnings and errors that pro-surf reports before going to pro-am,

i would go back to your original starting iges geometry and fix any problems.
  Reply With Quote

Old   January 25, 2006, 20:26
Default Re: Prosurf to Proam problems, help please
  #3
William Wallace
Guest
 
Posts: n/a
Yeah I understand what you're saying but whats the best way of getting rid of the 199 free curve errors without distorting the overall profile of the CAD model.

Thanks for the reply

Will
  Reply With Quote

Old   January 26, 2006, 13:57
Default Re: Prosurf to Proam problems, help please
  #4
William Wallace
Guest
 
Posts: n/a
Can I also ask what exactly is a free curve error, I think if I have a better understanding then it may help. I've looked in the manual but can't seem to find an explanation.

Regards

Will
  Reply With Quote

Old   January 26, 2006, 15:06
Default Re: Prosurf to Proam problems, help please
  #5
William Wallace
Guest
 
Posts: n/a
Heres an update, I've created a model using Pro E and saved as an iges file then imported it into prosurf and it isn't showing any errors at all. So I save the prostar files. Then when I go to import the .cel and .vrt file into proam its still saying

**ERROR - NO CELLS DEFINED IN MODEL and MAXIMUM CELL NUMBER IS NOW 0 MAX VERTEX IS NOW 0

So I'm assuming that I'm doing something very wrong?

Regards

Will
  Reply With Quote

Old   January 26, 2006, 15:52
Default Re: Prosurf to Proam problems, help please
  #6
Tom
Guest
 
Posts: n/a
When you export the prosurf model it writes it as a proam dbs (1 if I remeber correctly). Just go to the database files in the proam GUI, and open it. Tom
  Reply With Quote

Old   January 27, 2006, 05:27
Default Re: Prosurf to Proam problems, help please
  #7
azmir
Guest
 
Posts: n/a
Are u sure u saved as .vrt and .cell ? As I see here on my pro-surf, we can only export it as .dbs or .iges only (version 3.24). Then when u import in proam the .dbs file, u have to change the DBID somehow. There is a bug in that box. The default DBID will yield nothing on screen. Change that value and u will get it.
  Reply With Quote

Old   January 27, 2006, 07:01
Default Re: Prosurf to Proam problems, help please
  #8
William Wallace
Guest
 
Posts: n/a
The way I save the file is by going to file then save prostar files, this allows you to save the cel and vrt files.

I've got a feeling that when I'm saving the iges file I'm not selecting the right options?

Does anyone know what options I should select when saving the iges file in Pro E?

This has got to be the problem. I'm going to try a few different options to see if anything changes.

Thanks for everyones input so far.

Will
  Reply With Quote

Old   January 30, 2006, 20:01
Default Re: Prosurf to Proam problems, help please
  #9
ted crilly
Guest
 
Posts: n/a
i use catia solids export function for iges and it usually works well, when you use prosurf to initally surface mesh your iges geometry you output it to native star-cd format , i.e. prosurf_output.dbs, then open es-aero or pro-am in import star-cd native database it the last one on the list then select the prosurf_output.dbs and hey presto you can then use pro-am or es-aero to build a decent working mesh.... if your lucky, i find alot of bugs with es-aero in win xp and star cd 3.26 and some manual manipulation of ammbatch commands in dos shell necessary

  Reply With Quote

Old   January 31, 2006, 02:38
Default Re: Prosurf to Proam problems, help please
  #10
yogesh
Guest
 
Posts: n/a
I think the best way is to clear all the cad errors in prosurf and write proam (.dbs) file and import it in proam it work may time for me
  Reply With Quote

Old   January 31, 2006, 22:30
Default Re: Prosurf to Proam problems, help please
  #11
tak
Guest
 
Posts: n/a
hi william

even my suggestion is try to have a good cad model i mean IGES/IGS file ...and using prosurf repair options hope we can overcome from free curves ..and once u have a surface mesh /triangulated mesh ..save it in proam DBS format instead of prostar CEL and VRT format. still if u have any free edges/ curves etc ..u can clear these errors using proam surface cleaning options ..wish u all the best

regards anand
  Reply With Quote

Old   February 3, 2006, 18:00
Default Re: Prosurf to Proam problems, help please
  #12
William Wallace
Guest
 
Posts: n/a
Well I finally got the file imported into Pro-am even when it still had free curve errors. What I did was to clear my working directory completely then put just the iges file into it. I then set it again as my working directory, imported the iges file into Pro-surf and repaired as best as I could then tried to import it into Pro-am and it worked fine. I honestly couldn't believe it, thanks to all your advice it's been very much appreiciated.

Kind regards

Will
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
iges-prosurf-proam-prostar-star elvis Siemens 6 October 17, 2005 05:35
Prosurf in batch mode Dhruv Siemens 1 September 19, 2005 19:02
ProSurf JBS Siemens 2 March 23, 2005 04:58
proam sankar Siemens 0 February 23, 2005 05:58
proam problems beastberg Siemens 1 April 25, 2004 07:33


All times are GMT -4. The time now is 10:01.