CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Moving Bed

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 20, 2006, 21:02
Default Moving Bed
Ahmad Al-Zoubi
Posts: n/a
Hi all,

I want to simulate a moving bed in a cylindrical tube. Hot air inlets from the tube side near the bottom and leaves near the top. Cold spheres enters from the top and leave the bottom of the tube. The Spheres flow rate at inlet equals that at the outlet and the tube is always full. The speed of the spheres is slow in comparison to the air.

I want to determine the temperature distribution at steady state.

Thanks a lot in advance.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving Reference frame - UDF - Moving mesh modisa FLUENT 0 April 18, 2008 13:31
moving car Frank FLUENT 1 June 30, 2006 16:45
Moving interface Unal FLUENT 4 April 16, 2004 10:02
moving bed. MP CFX 0 February 9, 2003 19:51
Moving Bed MP FLUENT 1 January 13, 2003 00:27

All times are GMT -4. The time now is 02:08.